Samsung Galaxy S7 Edge Rom Android 8.0 (G930F/FD) (G935F/FD)

Samsung Galaxy S7 Edge Rom Android 8.0 (G930F/FD) (G935F/FD)

  • HOW TO UPDATE:

    1. Download and install driver: SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
    2. Then, download ODIN (last version): Odin 3.13.1
    3. Download and extra firmware.
    4. Save data, remove Google account, remove passcode (or pattern lock).
    5. Reboot phone to Download Mode (Press and hold Home + Power + Volume Down), press Volume Up to continue
    6. Connect to PC (or laptop)
    7. On ODIN tool:
      BL: select to BL_G93xFXXU2ERD5_…
      AP: select to AP_G93xFXXU2ERD5_…
      CP: select to CP_G93xFXXU2ERD5_…
      CSC: select to CSC_OXA_G93xFOXA2ERD5_…
    8. Click Start and wait about 5-10 minutes
    9. If your phone is stuck on the SAMSUNG logo for 15 minutes: reboot to Recovery > Wipe data + cache > Reboot
  • Samsung S7: G930FXXU2ERD5_G930FOXA2ERD5_BTU_FULL_8.0.zip (2,3G)
  • Samsung S7 Edge: G935FXXU2ERD5_G935FOXA2ERD5_BTU_FULL_8.0.zip (2,3G)
Samsung Galaxy A6+ 2018 ROMs (SM-A605G) (SM-A605GN) (SM-A605F)

Samsung Galaxy A6+ 2018 ROMs (SM-A605G) (SM-A605GN) (SM-A605F)

Samsung Galaxy A6+ 2018 ROMs (SM-A605G) (SM-A605GN) (SM-A605F)

How to Flash

Step 1: Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step.

Step 2: Download (Stock ROM compatible with your device or if you have already downloaded the firmware then ignore downloading it again) and extract it on your computer. After extracting you will be able to see these kind of files:

Step 3: Power Off your Samsung Device.

Step 4: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume up key to continue.

Step 6: Download and extract Odin on your computer. After extracting you will be able to see the following files:

Step 7: Now, Open Odin3 and connect your phone to the computer.

Step 8: Once you have connected the phone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.


Step 9: Once your device detected by Odin, click on the “PDA” button and select the tar.md5 file that you have extracted in Step #2.


Step 10: Now, click on the “Start” button in Odin to begin the Flashing process.


Step 11: Once you see, the Green Pass Message then remove the USB cable from the device (during this process, your device will restart automatically).


Step 12: Your Samsung Device will now stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.


Step 13: In Recovery Mode, Wipe Data/factory reset.


Step 14: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.


Step 15: Now, your Samsung Device will restart without any issue with the Stock Rom you have downloaded.

DOWNLOAD:

1. Samsung Galaxy A6+ (2018) (SM-A605G)

2. Samsung Galaxy A6+ (2018) (SM-A605GN)

3. Samsung Galaxy A6+ (2018) (SM-A605F)

Check These valid links also: Links Credit to vnrom.net

Samsung Galaxy Note FE (N935F) (N935S) (N935L) (N935K) Rom Download

Samsung Galaxy Note FE (N935F) (N935S) (N935L) (N935K) Rom Download

How to Flash Samsung Galaxy Note FE (N935F) (N935S) (N935L) (N935K) Rom

  1. Download and install driver: SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
  2. Then, download ODIN (last version): Odin 3.13.1
  3. Download and extra firmware.
  4. Save data, remove Google account, remove passcode (or pattern lock).
  5. Reboot phone to Download Mode (Press and hold Home + Power + Volume Down), press Volume Up to continue
  6. Connect to PC (or laptop)
  7. On ODIN tool:
    BL: select to BL_N935FXXU2BRD4_CL13435650_QB17822535_REV00_user_low_ship.tar.md5
    AP: select to AP_N935FXXU2BRD4_CL13435650_QB17822535_REV00_user_low_ship_meta.tar.md5
    CP: select to CP_N935FXXU2BRD1_CP9397529_CL13371813_QB17645755_REV00_user_low_ship.tar.md5
    CSC: select to CSC_OLB_N935FOLB2BRD4_CL13435650_QB17822535_REV00_user_low_ship.tar.md5
  8. Click Start and wait about 5-10 minutes
  9. If your phone is stuck on the SAMSUNG logo for 15 minutes: reboot to Recovery > Wipe data + cache > Reboot

Downloads

Samsung Galaxy J3 ROM (2018) (SM-J337) Combination + Full Download

Samsung Galaxy J3 ROM (2018) (SM-J337) Combination + Full Download

Samsung Galaxy J3 ROM (2018) (SM-J337) Combination + Full Download

Post Credit to vnrom.net

1. Samsung Galaxy Y (2018) (SM-J337T)

2. Samsung Galaxy Y (2018) (SM-J337A)

3. Samsung Galaxy J3 (2018) (SM-J337AZ)

4. Samsung Galaxy J3 (2018) (SM-J337U)

5. Samsung Galaxy Y (2018) (SM-J337V)

6. Samsung Galaxy J3 (2018) (SM-J337VPP)

6. Samsung Galaxy Y (2018) (SM-J337W)

7. Samsung Galaxy Y (2018) (SM-J337R4)

8. Samsung Galaxy J3 (2018) (SM-J337R7)

9. Samsung Galaxy J3 (2018) (SM-J337P)

 

HOW TO FLASH:

These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on Windows Computer.
Requirements: Your Samsung Smartphone should have at-least 30-40 percent of phone battery to perform the flashing process.

Flash Samsung Stock Rom using Odin

Step 1: Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step.


Step 2: Download (Stock ROM compatible with your device or if you have already downloaded the firmware then ignore downloading it again) and extract it on your computer. After extracting you will be able to see these kind of files:


Step 3: Power Off your Samsung Device.


Step 4: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.


Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume up key to continue.


Step 6: Download and extract Odin on your computer. After extracting you will be able to see the following files:


Step 7: Now, Open Odin3 and connect your phone to the computer.


Step 8: Once you have connected the phone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.


Step 9: Once your device detected by Odin, click on the “PDA” button and select the tar.md5 file that you have extracted in Step #2.


Step 10: Now, click on the “Start” button in Odin to begin the Flashing process.


Step 11: Once you see, the Green Pass Message then remove the USB cable from the device (during this process, your device will restart automatically).


Step 12: Your Samsung Device will now stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.


Step 13: In Recovery Mode, Wipe Data/factory reset.


Step 14: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.


Step 15: Now, your Samsung Device will restart without any issue with the Stock Rom you have downloaded.

Samsung Galaxy J2 Pro (SM-J250F) (SM-J250M) (SM-J250G) (SM-J250Y) rom

Samsung Galaxy J2 Pro (SM-J250F) (SM-J250M) (SM-J250G) (SM-J250Y) rom

SAMSUNG GALAXY J2 PRO (SM-J250F)

2. SAMSUNG GALAXY J2 PRO (SM-J250M)

3. SAMSUNG GALAXY J2 PRO (SM-J250G)

4. SAMSUNG GALAXY J2 PRO (SM-J250Y)

HOW TO FLASH: