Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
ROM installation on Samsung Devices using Odin tool and Frp bypass working methods
[WARNING] Emyoo Solutions is not responsible for any damage done to your device (physical or financial) Please use these methods at your own risk. Thanks
The post is influenced by the orignal posts at Vnrom by Duy Nguyen
Part 1:
ROOT ACCESS:
Flashing Samsung ROM using Odin and Stock ROM Recovery, Root Acess All in One Go. Follow the instruction below
Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
All Done
Part 2:
Bypass FRP:(Use with Caution Find the Relevant Method online)
Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
All Done
Part 2 Bypass FRP:(Device Specific)
Flash ROM combination, then go to SETTINGS>
Set screen lock password>
Flash back to full ROM (select 4 files BL – AP – CP – CSC)>
flash, activate it to ask for screen password instead of logging in to your Google account>
enter the screen password you set in ROM combination> Done
Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
All Done
Part 2:
BYPASS FRP AND GOOGLE ACCOUNT VERIFICATION & ROM FLASHING
Method 1:
Flash rom combination,
then go to SETTINGS>
Set screen lock password>
Flash back to full rom (select 4 files BL – AP – CP – CSC)>
flash, activate it to ask for screen password instead of logging in to your Google account>
enter the screen password you set in rom combination>
Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
Samsung Z4 is a new smartphone running Tizen 3.0 operating system developed by the company, main features of the phone includes its awesome user experience and camera quality that it carries.
Recent Comments