Log in to your Outlook account on your computer and send email to the email yourself, and attach the downloaded QuickShortcutMaker.apk file to the mail.
METHOD:
At the screen select Language, we choose English Language for easy operation later (if anyone is in another screen, restart the computer), put 2 fingers simultaneously on the screen and hold until TalkBack Tutorial is turn on.
Swipe in the middle of the screen in the shape of an ” L ” (swipe from top to bottom) to turn on Global Context Menu > Select TalkBack Settings (tap once on TalkBack Settings and tap twice to confirm).
After entering TalkBack Settings , hold down both the Up and Down Volume keys to turn off TalkBack mode (for easier operation)> Press until the bottom edge of the screen shows the words ” Accsessibility shortcut disabled TalkBack ” is to be. Note: After turning off TalkBack, all pressing actions will return to normal, no longer have to press and press 2 times to confirm again.
Still in TalkBack Settings , scroll down to select Help & feedback
Select the first line that says ” Get started with Voice Access “
Touch the Play button (red) in the Youtube video
Tap on the Circle Clock in the Youtube video to open the YouTubeapplication
Click on any video in the YouTube application, select the Share icon below the video (the icon with the arrow to the right)> select the Email icon > select the Other item and log in the Outlook account you just registered above .
Open the mail I just sent in the preparation above (Go to Inbox or Sent will see the mail)
Download the QuickShortcutMaker.apk application that is included in the mail
After downloading is complete, the application will automatically be installed but will appear a notice board below, we click Setting and turn ON item Allow app installs > BACK and press NEXT > wait for the application to install, then select OPEN Open the door.
Type Search of the app ” Home ” and select the application ” Huawei Home “> select the next “Huawei Home” > select the next ” TRY ” line to open the application.
Select the ” SET UP PHONE ” item if the message is displayed.
Now the phone will enter the main screen> open the Settings app > pull down to select System > About phone> 7 consecutive touches to the Build Number section to turn on Developer Options ( Developer Options )
Back again and select Developer Options > turn ON the ” OEM unlocking “
Restart the computer and activate the device as usual, will skip the step of Login to Google account.
Instructions for deleting Google account verification (bypass FRP) for Huawei Y9 2019 (JKM-LX2)
PRE WORK:
Before starting work, you need to prepare an email account (Not Gmail, Outlook, yahoo, etc.), make new or old account okay.
Visit vnrom.net/bypass and download the QuickShortcutMaker.apkapplication
Log in to the above email account to your computer> compose mail and attach the file QuickShortcutMaker.apk to the message> sent to your email address or other email.
METHOD:
On the phone, at the first screen (language selection screen)> select ENGLISH language to operate like the instructions below, avoid the case of not finding some items as I will guide.
Still at the language selection screen> you put 2 fingers simultaneously on the screen and hold about 5-10 seconds to turn on TalkBack mode (when switching to the TalkBack tutorial screen , leave your hand). Note: to select 1 item in TalkBack mode, you need to do the following: tap once to select, then touch 2 times to confirm
On the screen, use one finger to swipe from top to bottom in the shape of an ” L ” and select ” TalkBack Settings “
Use 2 fingers to scroll down and select ” TalkBack Tutorial “> select ” TURN TALKBACK OFF ” to turn off TalkBack (purpose to manipulate more easily)
Now the phone will go back to the ” TalkBack Settings “> screen and continue to scroll down and select ” Help & feedback “> select ” Get start with Voice Acces “
Click on the PLAY icon of Youtube > select the next icon Arrow > select 3 dots icon > select Share > Email > Other
Here you log in to your email account (Not Gmail, Outlook, yahoo, etc.) prepared above.
After signing Sign In to log in, tick the ” Automatically download attachments when connecting to Wi-Fi ” section.
At the Email interface (after you have successfully logged in)> go to Sent mail > select to the mail we sent in PREPARATION above.
Open the mail and download the QuickShortcutMaker.apk application before attaching it to the mail.
Download is complete, the application will automatically be installed> the phone will require us to authenticate, then you select SETTING > trick to enable Allow app installs > after installation is complete, Open (Open) always application.
At the ” Input keyword to filter ” section> type in ” Huawei Home “> select Huawei Home> now a list of new Huawei Home is released> select the first Huawei Home in the new list drop off> select ” Try “> Select ” Setup Phone ” (if available)
Now the phone will jump to the main screen. Go to Settings> System> About phone> repeatedly tap ” Build Number ” to turn on ” Developer Options ” – when you have ” You are now a developer!” The screen below is turned on.
Back and select the “Developer Options”> item to turn on the item “Enable OEM unlock”> then restart the computer and activate the device as usual, the Google account verification step has been ignored.
File .ofp is firm and must flash rom with rom file tool comes in. How to active and flash see instruction below.
QFIL file also has the same effect as the .ofp file but is read by the device (box) or tool. You use the QFIL tool to flash, you need to refer to this article .
File loader is a support file used to clear the screen password and verify google account using RBSoft or Miracle tool
INSTRUCTIONS:
OPPO F3 PLUS REMOVE SCREEN LOCK, UNBRICK, FIX THE LOGO (CPH1613) AND (CPH1611)
Driver I instructed to install and fix very detailed error in the video, AE was hard to see if the computer did not receive the driver.
The key to flash the ROM is to activate the tool, want to make the AE need to load all 3 ROMs above, then run the tool in ROM A57, finish running off. Then the OPPO F3 tool has been activated. Open the tool in OPPO F3 rom up, select Debug Tool menu> Read back …> turn off all the displayed tables. So has activated the entire tool. Include F3 Plus and A57 always.
Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
ROM installation on Samsung Devices using Odin tool and Frp bypass working methods
[WARNING] Emyoo Solutions is not responsible for any damage done to your device (physical or financial) Please use these methods at your own risk. Thanks
The post is influenced by the orignal posts at Vnrom by Duy Nguyen
Part 1:
ROOT ACCESS:
Flashing Samsung ROM using Odin and Stock ROM Recovery, Root Acess All in One Go. Follow the instruction below
Turn off your phone and then press and hold the volume UP + Home + Power button simultaneously for 3-5 seconds.
Start the phone in Download Mode (Currently, the new phones have different keys, so the way to Download different mode)
– Method 1: Press and hold 3 Home + Power + Volume Down keys, then press Volume Up if it is weak
– Method 2: Press and hold 3 POWER + VOLUME DOWN + BIXBY keys
– Method 3: Press and hold 2 VOLUME DOWN + VOLUME UP keys and plug in the USB cable connected to the computer
– Method 4: Press and hold the 3 keys POWER + VOLUME DOWN + VOLUME UP
– Method 5 (Note9): Press and hold 2 VOLUME DOWN + BIXBY keys and plug in the USB cable connected to the computer
After pressing Volume Up, you will get the device into Download Mode on Samsung devices that look like:
Please note that you can flash only with .tar or .tar.md5 files
Proceed to the UP ROM on Odin
ID: COM must be lit, ie Odin has connected to the Phone
Select AP or PDA (old Odin) => to the place where the ROM version is located with the * .tar.md5 extension
Wait a while for the software to load the ROM. Odin will load when the Message frame has the message shown above.
Click Start to start the ROM loading process
Sitting for 5-10 minutes then Odin told PASS that the process was successful, the phone would restart automatically.
All Done
Part 2:
Bypass FRP:(Use with Caution Find the Relevant Method online)
Recent Comments